#Embeddable calendar instacal software
#Embeddable calendar instacal password

A different type of sensor (i.e., thermocouple, RTD, thermistor or semiconductor) can be connected to each channel pair, however both channels in the channel pair need to be the same sensor type (although if thermocouples are connected it is possible to mix thermocouple types). Each pair of differential inputs constitutes a channel pair. The OM-WEB-TEMP provides a 24-bit analog-to-digital (A/D) converter for each pair of differential analog input channels.

Semiconductor temperature sensors–LM36 or equivalent.

2-, 3- or 4-wire thermistor measurements.

Thermocouple Types J, K, T, E, R, S, B, N.

#Embeddable calendar instacal software

The OM-WEB-TEMP provides 8 differential input channels that are software programmable for different sensor types including:

#Embeddable calendar instacal password

When using InstaCal, if the login settings have been changed from the default, a login name and password are required to change the configuration settings. Network configurable options are settable using InstaCal. All hardware configurable options are selectable with the web browser or the included InstaCalTM utility software. On-board LEDs display the status of communications and external power. The included external power supply (ac adaptor) is used to provide power. The OM-WEB-TEMP provides 8 temperature channels and 8 digital I/O channels. The web browser used to access the OM-WEB-TEMP’s web interface must support JavaScript. Connect the device’s 10Base-T Ethernet port to a local or wide area network using the supplied ethernet cable, to a single computer through a hub using the supplied ethernet cable, or directly to a computer using a standard CAT-5 crossover cable. No external software is required other than a web browser and a TCP/IP connection. The web interface is built into the device’s firmware, and does not need to be installed on a computer. Only one user can change configuration options on the device at a time. View current sensor measurements and channel data, and configure hardware options from the device’s home page. Browse to the device’s home page by entering the URL that is printed on the device into the browser. The OM-WEB-TEMP’s embedded web interface provides access to current data and configuration settings using a standard web browser. Simply connect the device to an Ethernet port or hub and view current data using a standard web browser. The OM-WEB-TEMP is a temperature measurement device with built-in web server.